Steel Bevel Brush
Steel Bevel Brush
Our steel brushes are ideal for removing weeds or unwanted grass on pavers, curbstones, cobblestones or other hard to reach areas. Clean larger areas such as courtyards or terraces quicker and with far less effort than brushing and without the need of chemicals.
We have three different types of brush within our range:
- Steel Knotted Bevel - The bristles are twisted to form separate, very strong arms, that are angled to give some movement when in use. They are also very good when working over uneven surfaces.
- Steel Crimp Bevel - The bristles are not twisted so give a softer brushing than the knotted bevels.
-
Steel Knotted Wheel - Same design as the knotted bevel only the arms are on the outside of a wheel so are ideal for getting into tight edges or between blocks.
Please remember that when working with grass trimmers you must be aware of the stringent safety rules. Please read the manufacturers guidelines and the safety data sheet included with our brush before using and be aware of the maximum RPM which varies between brushes.
SKU:2639
Couldn't load pickup availability
In stock
View full details
Collapsible content
Product Description
We have three different types of brush within our range:
Steel Knotted Bevel - The bristles are twisted to form separate, very strong arms, that are angled to give some movement when in use. They are also very good when working over uneven surfaces.
Steel Crimp Bevel - The bristles are not twisted so give a softer brushing than the knotted bevels.
Steel Knotted Wheel - Same design as the knotted bevel only the arms are on the outside of a wheel so are ideal for getting into tight edges or between blocks.
Product Specification
Size - 175mm / 25.4mm
Weight - 500g
Maximum RPM - 12500
Knot Wheel Brush
Size - 200mm / 25.4mm
Weight - 550g
Maximum RPM - 12500
Knot Wheel Brush
Size - 250mm / 25.4mm
Weight - 1200g
Maximum RPM - 10000
Knot Wheel Brush
Size - 210mm / 25.4mm
Weight - 1000g
Maximum RPM - 6000
Crimp Bevel Brush
Size - 180mm / 25.4mm
Weight - 640g
Maximum RPM - 6000
Crimp Bevel Brush
Size - 170mm / 25.4mm
Weight - 800g
Maximum RPM - 10000
Knot Bevel Brush
Size - 200mm / 25.4mm
Weight - 1050g
Maximum RPM - 10000
Knot Bevel Brush
FAQs
How do I know which size will fit my strimmer?
If you can remove the attachment or strimming head of your strimmer you will see a metal rod onto which the head fitted. It is the diameter of this threaded rod that you have to measure as this is what the bevel will slip over and attach to.
I'm worried they could damage my surface. Is there an alternative?
If you are planning to use the brush on a mineral surface (blocks, pavers etc) then you should be fine with these metal heads. Please remember that you don't have to push hard as you should allow the brush to do the work for you however, if you are still concerned, we have bevel brushes with synthetic bristles which are much softer so ideal for areas such as tarmac or where you are concerned about potential damage. You can find these alternative heads can be found in the accessories tab above or by following this link.
I have a sandstone patio that is full of weeds. Should I use a metal or plastic head?
Sandstone is a soft stone so you may find that the metal brush heads, especially the knotted bevel brush, could offer too much resistance therefore could mark the stone. If you definitely want metal then the crimp bevel brush is much softer than the knotted so will clear without the very harsh attack of the knotted. If you feel that you need the strength of the knotted then why not look at the knotted wheel with which you should be able to get between the slabs to remove growth without touching the face of the stone.