Filter Spares byFilter products by
Foaming nozzle for use with our Mesto range of 'hand' sprayers.
Foaming nozzle for use with our Mesto range of Cleaner sprayers.
A selection of nozzles for the application of different chemical products. Hollow cone and fan spray nozzles.
Foaming nozzle for use with our Mesto sprayers Inox Plus, Cleaner & Primer compression sprayers.
Foaming nozzle for use with our Mesto Flexi Plus compression sprayer.
Nozzle made from PVDF which is resistant to some of the most aggresive cleaning chemicals.
Adjustable sprayer nozzle allows you to adjust your spray pattern from full jet to large hollow cone. Gives you flexibility to use the correct spray pattern for the chemical products you are using.
Brass sprayer nozzle with 90o spray arc. Fully adjustable giving you a range of spray patterns for general spraying including horticulture.
Stainless Steel nozzle for most spraying requirements. Hollow cone spray pattern with 70o spray angle.
1.1mm bore, brass, hollow cone nozzle for our Mesto range of sprayers
1.85mm bore, brass, hollow cone nozzle with 80o spray angle to fit with our Mesto sprayers
Brass nozzle with a hollow cone spray pattern for our Mesto range of sprayers. 65o spray angle and high flow rate.
High flow rate brass nozzle especially suited to thick liquids and the construction industry.
Double head spray extension with hollow cone spray pattern especially suited for horticulture use.
This nozzle is for our Goziper range of sprayers and designed for the application of herbicides
Brass Flat Jet nozzle for the fine distribution of various liquids including release agents, disinfectants and cleaning solutions. Used widely in the construction industry.
Fine distribution of liquids such as biocides and release agents
For the application of biocides and cleaning chemicals. Wide spray angle for good coverage.
Threaded connector M11 with Viton seals for use with our Mesto sprayers
Valve to connect your METAL or STAINLESS STEEL sprayer to an air compressor.
Valve to connect your METAL or STAINLESS STEEL Mesto sprayer to an air compressor.
Two hollow cone, brass nozzles that rotate allowing you to spray in different directions
Service kit for our Cleaner range of compression sprayers with EPDM seals
Service kit for our Super Extreme & Cleaner range of compression sprayers with EPDM seals
Serevice kit for our Metal and Stainless Steel sprayers with FPM seals
Replacement seal kit for our Profi Plus and Cleaner range of compression sprayers
Replacement handle for our 8-litre Mesto, alkaline, foaming sprayer
For all of our Mesto compression and knapsack sprayers. Maintain a constant 1bar spray to increase spray times and maximise chemical efficiency.
For all of our Mesto compression and knapsack sprayers. Maintain a constant 1.5bar spray to increase spray times and maximise chemical efficiency.
For all of our Mesto compression and knapsack sprayers. Maintain a constant 2bar spray to increase spray times and maximise chemical efficiency.
Telescopic lance extending to 1 metre for our knapsack, backpack and compression sprayers.
This is a replacement discharge handle for a number of our Mesto compression sprayers
Brass/Plastic reducer with 'o-ring' - 18mm female to 11mm male thread.
Female/Female connecting collar for our Mesto range of sprayers