£37.00 - £220.00 (ex.VAT)
Water-based protective, peelable floor coating
Protecsol is a water-based, peelable protective floor coating, with ionizing and adherent qualities, for all types of non-porous surfaces in all types of industrial setting.
Protecsol is used for the protection of concrete and resin ﬂoors e.g. in spray booths, the protection of tiled ﬂoors and walls from paint and varnish, oils, greases, diluted acids, diluted alkaline, cement etc.
Protecsol will protect floors, and other surfaces, from paint overspray and dust as well as from both foot and vehicular traffic.
APPEARANCE : opaque white
DRYING : 6 hours at 20 °C
FLEXIBILITY : very good, resistant and peelable
DILUENT : water
COVERAGE: 3-5m2 per litre depending upon surface
METHOD OF USE
NON POROUS CONCRETE OR TILED FLOOR: Apply PROTECSOL in a thick layer with a spatula or roller (approx 500 to 600 microns)
STEEL SURFACE, COATED OR BARE: Apply in a thick layer with a roller or brush (300 to 400 microns) PROTECSOL may be used in areas at high temperatures 70 to 80°C.
Remove after 3 months use. Heavily used and dirtied walkways may be peeled away easily with a light incision and applied again.
"Really happy with the booth floor coating and the customer service is brilliant. Put the coating In two of our booths and really brightens the Floor making it so much easier to paint in. Stays slightly tacky too so helps with dust. Highly recommended and will be using again."
Can this really protect my floor from a forklift?
Protecsol will protect your floor from marks that a forklift will leave on floors. It is very important that Protecsol is allowed to dry fully and is kept dry. If the floor becomes wet then it will lift if a forklift turns tight circles upon it.
How to I remove Protecsol?
You simply peel Protecsol from the surface when you want it removed. You can't expect the whole floor to lift in one piece however, if properly applied, then the coating will peel from the surface.