SP260 is a universal detergent for cleaning and degreasing both in construction and around the home.
It contains a surfactant, that is very eﬀective at ambient temperature, and is very eﬀective at eliminating oils, sludge, animal & vegetable fats, soot and many other deposits. SP260 does not attack non-ferrous metals.
SP260 is authorised for use in contact with food preparation surfaces. Its components are on the authorised list for cleaning containers that are in contact with foodstuﬀs. It is also a very effective cleaner of building roofs facades, removing atmospheric pollution and staining. After treatment surfaces should be rinsed with clean water.
- State - Liquid
- Colour - Colourless
- pH @ 5% - 10.5
- Density - 1.03
Steam Cleaner - Make a solution of around 20% concentration so that the concentration at the nozzle tip is approximately 2%.
Manual Spray - Concentration between 5-20% and higher if necessary. Apply and leave to act between 2 - 10 minutes before rinsing with hot water or brush with cold water.
Foaming Spray - Concentration between 5-30%. Apply and leave to act between 5 - 10 minutes before rinsing with pressurised water.
What is the coverage of SP260?
Very hard to give an exact coverage rate as it depends upon the porosity of the surface, the concentration at which it is being used and the method of application. As a guide, applying with a compression or knapsack sprayer will give you a coverage between 20m2 and 120m2 per litre. This means that a 10-litre container will give you an approximate coverage between 200m2 and 1200m2.
You may also be interested in...
BATICLEAN CR is a systemic moss killer to effectively kill moss, algae, lichen and mould growth on all types of hard surfaces. It will also keep your surfaces clear of moss as it is designed NOT to...