Hand Pressure Sprayer - Foaming / Acid

Versatile hand pressure sprayer with 1.5-litre capacity for neutral & acidic foaming chemicals

Read More

Product code

0480

Each £18·95 exc VAT
Total £18·95 exc VAT

This 1.5-litre 'hand' compression foaming sprayer has FPM seals meaning that it is resistant to acidic foaming chemical solutions. Depending upon the type of chemical being used, this sprayer will generate a dry, long adherent foam over a wide area.


  • Tank - Plastic
  • Maximum operating pressure - 3 bar
  • Pump - Plastic 31mm piston
  • Weight - 500g
  • Tank operating capacity - 1.5 litres
  • Nozzle - Flat jet POM
  • Tank volume - 2 litres
  • Seals FPM - Synthetic rubber with high elasticity properties which makes it a very good product for the protection of seals and O-rings. FPM seals are are highly resistant to hydrocarbons, oils, strong acids, aromatic and chlorinated solvents and has a high temperature resistance.

Can I put any cleaning chemical in this sprayer?

You can put any liquid in this sprayer as long as it isn't a high alkaline for which you should use our Alkaline Hand Sprayer-1.5 litre however the sprayer will only produce foam if the cleaning liquid is foaming. The foaming sprayers work by mixing the cleaning liquid with air in or around the nozzle so if, for example, you filled the sprayer with water then the sprayer would not produce foam.