Cleaning Textured Walls

Cleaning Textured Walls

Moss Killer - Clean painted, rendered or pebble dash walls

Textured wall coatings, pebble dash or even smooth painted areas tend not to become coated with actual 'lumps' of moss, normally they suffer from either an algae or lichen the colour and type of growth can depend greatly upon the area of the country. However the treatment remains almost the same just differing slightly depending upon the surface coating.

If you have a textured coating or pebble dash walls then you can undertake exactly the same processes just be careful with the amount of pressure you apply wither during pre-washing, application or rinsing.


With all surfaces preparation is the key to a successful job. With this type of surface cleaning the old growth is quite straight forward there are a number of options:

OPTION 1 - Depending upon the type of growth you may find that wetting the area and brushing will remove a vast majority or even all of the growth. It may sound simple but sometimes this can be the most effective method.

OPTION 2 - Brush the area to remove any loose growth and dirt then spray with  CONCENTRATED MOSS & ALGAE KILLER - Baticlean CR  as detailed in TREATMENT below.

OPTION 3 - If the area has hard lichen growth or especially black growth then more forceful measures may be required therefore spray the area with HIGH POWER SURFACE CLEANER - Batifort. This kills the growth on contact and should be left on the surface for between 10-20 minutes. After which the area should be washed with either a hosepipe and brush or, ideally, a SMALL pressure washer. The pressure washer not only rinses the product but also removes the dead growth from the surface.


Once the surface has been cleaned and is dry apply a coat of CONCENTRATED MOSS & ALGAE KILLER - Baticlean CR. This will kill any remaining growth and the invisible spores but is then designed to be left upon the surface where it can inhibit re-growth. Please remember that Batimoss CR should only be sprayed on to a DRY surface.


The effective lifespan of CONCENTRATED MOSS & ALGAE KILLER - Baticlean CR depends upon the area in which it is being used. If surrounded by trees and / or constantly in shade then you may see fresh growth within 10 - 18 months however if on an open wall there may be no re-growth for many years.

When fresh growth is visible simply brush the area and apply a new coat of CONCENTRATED MOSS & ALGAE KILLER - Baticlean CR.



Display: List / Grid
Sort By:
Baticlean CR - per litre

Concentrated moss killer for use on all surface types. Kill moss and inhibit re-growth with one product.

Formerly know as 'Batimoss'


Batifort 5-kg

Black spot removal - BATIFORT 5kg will cover 25 - 50m2 depending upon surface type

Yard Broom
This Yard Broom is a fine example of quality traditional brushware.  The solid wood stock is..
Batifort 10kg

Black spot lichen removal - BATIFORT 10-kg coverage 50-100m2

Compression Sprayer - 5-litres

Compression sprayer supplied with carry strap, application lance, 2 x lance extensions, 2 x hoses and 3 x nozzles.

Compression Sprayer - 8-litre

Compression Sprayer Range - 8 litre compression sprayer

Compression Sprayer - 1-litre

Small Compression Sprayer - 1-litre sprayer

Sprayer Extension Lance - 3.2-meters

3 piece telescopic lance extension with 3.2-meter reach. Can be used with all types of knapsack, backpack and compression sprayers.



Powered By Lee
SPCB (UK) Ltd - Mosskillers © 2015